LGP Pocket Route STD
LGP Pocket Route Std
LGP Pocket Route Std1
LGP Pocket Route Std2
LGP Pocket Route Std3

LGP Pocket Route Standard (STD)

The LGP Pocket Route Std is a multifunctional device that offers vibration measurement, allowing users to monitor machine conditions cost-effectively. It comes in three versions—Standard, Pro, and Plus—with future upgrade options like balance features, bearing testing, and sound measurement, all integrated into free software that supports multiple systems.

Categories: , Tags: , ,
FacebookTwitterPinterestRedditDeliciousLinkedinWhatsappTelegramEmail

About LGP Pocket Route Standard (STD):

The LGP Pocket Route Standard (STD) vibration meter from LGP measures vibration. Connect your headphones and listen to the bearing sound for free!

Other Versions:

This device is offered in 3 versions: LGP Pocket Route Standard (STD), LGP Pocket Route Pro (with temperature measurement) and LGP Pocket Route Plus (with temperature measurement and distance measurement).
By purchasing this device, you can start planning condition monitoring initially and at low cost.
Keep in mind that the good feature of this device is that in the future you can add balance options (even up to 4 pages), bearing tester and sound measurement.
Also, the device software is completely free and you can install it in as many systems as you want.
Also, in the future, if you also purchase an alignment device, they will all be in the same software and as a result, all the data will be in one place.

 

For further information, you can see video of the device on YouTube:

Technical specifications Of LGP Pocket Route Standard (STD):

Amplifier type Charge or ICP (piezoelectric accelerometers)
Signal VHC, Peak-Peak, 0-Peak, RMS
Measured parameters Acceleration, Velocity, displacement, frequency, audio output
Display resolution QVGA, 320 x 240 Pixel; Dimensions: 3.5 inch diagonal
Frequency range 1 Hz to 10 kHz
 

 

Dynamic frequency range

   Acceleration:  1 – 10,000 Hz (-3 dB) & 0.01 – 500 m / s 2
  Velocity:

1 – 16 Hz (-3 dB) & 0.8 – 5000 mm / s

1-80Hz (-3dB) & 0.2 to 390 mm/s

1 – 5000 Hz (-3 dB) & 0.1 – 79 mm / s
Displacement:

1 – 16 Hz (-3 dB) & 0.05 – 50 mm

1 – 80 Hz (-3 dB) & 0.05 – 2.1 mm

1 – 1000 Hz (-3dB) & 0.003 – 0.02 mm
Accuracy ± 2%
Sampling frequency 32 kSPS
Frequency resolution Fmax / FFT resolution
FFT Spectrum resolution 400, 800, 1600 lines
Weight functions (windows) Hanning, rectangular
Trigger Mode Free and internal
Housing ABS
Environmental protection    IP65
Operating temperature range -10ºC to 50ºC
Relative humidity up to 80%
Battery, continuous operation time e 4.8V, 8 hours
Automatic shutdown, adjustable delay 2 to 99 minutes
Data storage 4GB microSD card
PC communication interface USB (Virtual Serial port for firmware upgrade)

Related products